6 May 2026
Industrial paint stripping for medium-large components: ALIT launches the new FASTRIP T6 immersion tank
In industrial coating processes, paint stripping is often considered a necessary but secondary step. Until it becomes a problem. When production volumes increase, coatings become more resistant, and operations cannot afford slowdowns, this phase stops being marginal and becomes critical. Not so much for the ability to remove paint, but for the difficulty of keeping the process stable over time.
FASTRIP T6 was developed precisely in response to this scenario: the new ALIT solution for immersion paint stripping of medium-large components.
How does it work?
Immersion technology is well established, but in daily operations it comes with variables that directly impact costs and production continuity: uneven temperature, bath degradation, and inefficient rinsing management. FASTRIP T6 addresses these aspects through a targeted design. The integrated wall heating system, full insulation and vertical mixers work together to keep the bath active and uniform, even when dealing with complex coatings such as epoxy-based paints.
Structure, size and configuration
FASTRIP T6 is designed to handle medium-large components, with configurations ranging from approximately 2400 up to over 5500 liters, and usable lengths up to 3500 mm. This allows the processing of large parts without the need to split loads or adapt the process. From a construction standpoint, the machine is built in AISI 304 stainless steel, ensuring chemical resistance and long-term durability even under continuous operation. Full insulation on all sides contributes not only to energy efficiency, but also to bath stability, reducing heat loss and maintaining consistent working conditions. The integrated electric heating system, combined with vertical mixers, allows operation up to 80°C while ensuring uniform treatment across the entire load. Additional technical features include a guided microwave level sensor, pneumatic lid, and a design that facilitates easy access and maintenance.
First feedback
Initial industrial applications confirm this approach. A FASTRIP T6 unit has been installed in a real production environment in Northern Italy, within a company specialized in industrial coating services. After several months of operation, feedback has been highly positive: the process remains stable over time, cycles are effective even on difficult-to-remove coatings, and chemical consumption remains consistent with the workload. The system has been smoothly integrated into the production flow, with simple operation for operators and easy maintenance access. In environments where equipment must be continuously available, this translates into fewer interruptions and improved operational continuity.
And what about costs?
The key point is not only technical, but also economic. When comparing different stripping technologies, the difference lies in energy, chemicals, water consumption and operational time. FASTRIP T6 is designed to act on these variables in a practical way. Insulation reduces heat loss, bath management extends chemical life, and cycle organization allows optimization of rinsing water usage. In existing applications, practices such as water reuse and combined immersion/rinsing cycles contribute to making the process more efficient and controlled.
Chemical stripping vs pyrolysis
For years, pyrolysis ovens have been considered the default solution for medium-large components, not necessarily for efficiency, but due to habit and perceived capacity. Today, this scenario is changing. Immersion stripping, when properly designed, allows greater process continuity and control over variables that are more rigid in pyrolysis systems: cycle times, batch management, energy consumption, and performance on complex coatings. With FASTRIP T6, this approach becomes applicable even to medium-large components, overcoming the traditional limitations of immersion technology at this scale.
Mobile pump, filtration, fluid management
Another key aspect is the system approach. FASTRIP T6 is not designed as a standalone machine, but as part of a broader process that includes fluid management, filtration, recycling and digital control. In this context, even auxiliary components become strategic in daily operations, helping simplify activities and improve overall efficiency.
Want to understand if this is the right solution for you?
Contact us by filling out the contact form on our website, specifying your interest in immersion paint stripping. Our technical sales team will get in touch with you as soon as possible to develop the solution best suited to your needs.
